Husky MP2500 Manual page 383

Control power output
Entry
Exit
Comment
Set/restore power menu (APM)
Entry
Exit
Comment
Get/set power management mode
Entry
Exit
Comment
Appendix G: MP2500, FS3 and FS/2:
AH=81H
AL=0 (off) or non 0 (on)
BL=0 (Port 1) or 1 (Port 2 and 3)
Returns nothing
On the FS3, use this function to control the +5V
output(s). On the standard MP2500, there are no
power outputs so this function is ignored.
AH=85H
AL=0 (restore) or 1 (set)
BL=user software interrupt, if set
Returns nothing
Use this function on FS3 to handle battery changes
from within an application, in APM mode. There is no
APM mode on MP2500, so the function is ignored.
AH=89H
AL=0 (get) or 1 (set)
BL=mode (0=SPM, 1=APM, 2=FPM), if set
AH=00H
BL=current mode (0=SPM, 1=APM, 2=FPM), if get
On the FS3, use this function to set or get the power
management mode (SPM, APM or FPM). On the
MP2500, there is only one battery charging mode,
similar to the SPM (Standard Power Management)
mode of the FS3, so this function is ignored.
361