Husky MP2500 Manual page 3

ELECTROMAGNETIC COMPATIBILITY (EMC)
! CAUTION !
Approved accessories only may be used with this equipment. In general all
cables must be high quality, shielded, correctly terminated and normally
restricted to 2 metres length. MP2500 AC Adaptors employ special
provisions to avoid radio interference and should not be altered or
substituted.
Unapproved modifications or operation beyond or in conflict with these
instructions for use may void authorisation to operate the equipment.
Europe
This apparatus complies with the radio interference protection requirements
of the Council Directive 89/336/EC on the approximation of the laws of the
Member States of the European Union relating to electromagnetic
compatibility. The product was tested in a typical configuration and found to
conform to the following test specifications:
EN55022 Radiated and conducted emissions, Class B.
EN50082 ESD and radiated and conducted immunity.
For further compliance details, refer to the specific CE Declaration Of
Conformity. This is available on request, quote the exact and full order code
for the product(s) in question.
Husky MP2500 System Developer's Guide iii