Husky MP2500 Manual page 36

2. FUNCTION KEYS: press to use application functions.
3. POWER KEY: press to turn on or off.
4. HANDSTRAP: on the rear of the unit, this helps you hold the MP2500
securely.
5. DEL/NO KEY: press to delete entries or answer No to a question.
6. ENTER/YES KEY: press to complete typing, type a carriage return, or
answer Yes to a question.
7. SHIFT KEYS (S): hold either down to type the characters (or
functions) shown above the keys.
8. BACKLIGHT KEY: if backlight option is fitted, press to illuminate the
screen for use in low light. You may need to press L at the same time,
depending on how your MP2500 is set up. This key can also be
configured (under software control) as the H
provides access to a range of special functions.
9. TYPING KEYS: type letters, or symbols and functions when used with
S (SHIFT).
10. BACKSPACE KEY: press to erase typing.
11. BATTERY CAP: remove to change batteries.
12. SPACE KEY: types a space (blank) character.
13. CURSOR KEYS: move the cursor.
SHIFT G and SHIFT H adjust screen contrast.
14. NUMERIC KEYPAD: type numbers.
15. ESCAPE KEY: usually used to cancel a function.
16. LCD SCREEN: displays prompts and messages and information as you
type.
MP2500 is normally shipped with the L, Q and R keys
Note:
configured to operate as PAW, CTRL and ALT.
14
USKY
H MP2500 System Developer's Guide
USKY
"PAW" key, which