Upgrading The Bios And Utilities; Communications; Peripherals; Power For Peripherals - Husky MP2500 Manual

The special MP2500 AC adaptors are the only units which may be used to
recharge the NiMH and NiCd batteries while they are installed in the
MP2500. The use of an non H
-approved AC adaptor or battery
USKY
eliminator may damage the MP2500 or the batteries and may contravene
EMC and safety legislation.

15.3 Upgrading the BIOS and Utilities

When revised versions of the MP2500 BIOS and utilities are released, you
may be able to upgrade your existing MP2500 units with them. Please
contact your system supplier, or H
support department.
USKY
Versions which require revised hardware may not be available in this
manner. For details, contact H or your supplier.
USKY

15.4 Communications

The communications capabilities of the MP2500 can be extended by adding
protocols and interfaces. For details, contact your supplier.

15.5 Peripherals

15.5.1 Power for peripherals

The standard MP2500 does NOT provide a power output (5 Volt out) via its
serial connector.
162 H MP2500 System Developer's Guide
USKY