Facilities - Husky MP2500 Manual

The last column of the edit area contains characters which indicate the line
length, as follows:
Character
<
+
B
K
If there is more data to the right, you can view it with line wrapping disabled
by using the J key.

12.6 Facilities

Text is entered at the cursor position, which can be moved at will through
the file. You can enter lines of up to 232 characters; if a line is longer than
the width of the LCD, with wrapping enabled, it will simply continue on the
next screen line.
To end a line, press E. This is normally stored in the file as CR-LF
(0DH, 0AH), but the LF option will make ED store it as the single character
CR (0DH).
Remember that you're working with a temporary copy of the file: the disk is
not updated until you use the SAVE command. This means that you can
abandon any changes you have made by leaving ED without saving the file.
96
Significance
no more data to right (ie all of the line is visible on this
line of the LCD)
more data to the right (or on next screen line, if line
wrapping is on)
line contains the block start marker (described later)
line contains the block end marker (described later)
H MP2500 System Developer's Guide
USKY