Block Delete; Block Move - Husky MP2500 Manual

Press any key to carry on.

BLOCK DELETE

Form: Ctrl+KY
BLOCK DELETE deletes the block defined by using BLOCK START and
BLOCK END.
BLOCK DELETE removes the block text and the block markers from the
file. The cursor may be positioned within the block; its position is immaterial.
You cannot reverse a BLOCK DELETE by using the UNDELETE command.
If you attempt to delete a block when there is no block defined, you will see
the following error message:
No block marked... press any key
Press any key to carry on.

BLOCK MOVE

Form: Ctrl+KV
BLOCK MOVE moves the block defined by using BLOCK START and
BLOCK END, to the current cursor position.
The block remains defined i.e. it is still marked.
You cannot move a block into itself i.e. the cursor must not be within the
block when you select the BLOCK MOVE command.
If you attempt to move a block when there is no block defined, you will see
the following error message:
No block marked... press any key
Press any key to carry on.
102 H MP2500 System Developer's Guide
USKY