Case 580SR Service Manual page 567

Hide thumbs Also See for 580SR:

Table of Contents

www.maskinisten.net

Insert the false differential box 380002674 into the

central body to measure the distance.

Check that the false box is inserted in both brake

flanges' housings.

Carry out the measurement with a depth gauge

through the suitable false pinion hole.

X = (conical distance to be measured)

A = (measured value)

B= (known value)= 100 mm

C= (known value)= 50 mm

In order to determine the shim (S) necessary be-

tween the pinion and the bearing, you should sub-

tract the (V) value stamped on the pinion head (V =

requested conical distance) from the (X) value.

Remove the false pinion, the bearings and the ring

nut from the central body.

Disassemble the false differential box from the

flanges and then unscrew the screws to remove the

SECTION 27 - REAR AXLE

(A+C) - B = X

Show Quick Links

Chapters

Table of Contents

580sr+590sr 695sr