Case 580SR Service Manual page 369

www.maskinisten.net
Remove the swivel housing (10) from the axle shaft.
Remove the thrust washers (16) and (19) with the
bushes (17) and (18).
Assembly
If it has been previously removed, reassemble the
steering stop composed by the screw (15) and nut
(14).
NOTE: do not tighten the nut (14) until the steering
angle adjustment has been done.
Insert the thrust washers (16) and (19) and the
bushes (17) and (18).
SECTION 25 - FRONT AXLES
Copyright ©
10
19
18
17
16
14 14
19
18
17
16
17
F27371
F27372
15
F37917
F27372