Case 580SR Service Manual page 953

www.maskinisten.net
ALARM ACTIVATION
Non Critical
Critical
Action Required
Safety
General Sound
Whenever an audible alarm activation is related to
an icon visualization, this icon should remain dis-
played at least for 4 seconds in order to give the pos-
sibility to the operator to understand the cause of the
alarm activation.
When many warnings with different priority occur,
the audible alarm is related to the higher priority
warning.
When a warning activates with an audible alarm dif-
ferent from the current one, the corresponding icon
must be displayed simultaneously.
If a warning lamp dedicated to a function is associat-
ed to the activation cause of the audible alarm, the
warning lamp will activate together with the audible
alarm.
SECTION 55 - ELECTRICAL SYSTEM
A failure is present but the operator can continue his work: the purpose is to warn him
regarding the presence of the fault. This will be a 1 second beep every 30 seconds.
A serious fault that can affect either the safety of the operator or the damage of the
loader backhoe is present: the operator shall stop the loader backhoe. This will be a
continuous alarm.
The system is asking for a certain maneuver from the operator in order to return to the
normal functionality. This will be a continuous alarm.
The system purpose is to warn the operator regarding the presence of a dangerous
situation for his safety. This will be a continuous alarm.
There are some condition in which there is the need of an activation of the audible
alarm. This is a one second beep to draw the operator's attention to the instrument
cluster.
Copyright ©
125