Case 580SR Service Manual page 1035

Hide thumbs Also See for 580SR:

Table of Contents

www.maskinisten.net

LOADER BUCKET WITH FORKS

The forks are heavy, so use great care when swing-

ing them into their working and stowage position.

INSTALL FORKS IN WORKING POSITION

Move the bucket to a level and firm ground. Stop the

engine and remove the starter switch key. Raise the

parking brake lever.

Remove the retained pin and the pin (1).

Lower the fork (2) manually and carefully until it is

laying in position against the bucket cutting edge.

IMPORTANT: the forks must be laying against the

cutting edge of the bucket, and never against bucket

Install the pin (1) and the safety pin.

Repeat the same operations for the other fork.

Slide the forks until they are suitably spaced for the

intended job.

IMPORTANT: the two forks must be positioned at

the same distance from the centre of the bucket.

IMPORTANT: never use the forks to lift the machine.

When using the forks with a 4x1 bucket, never at-

tempt to use the bucket jaw opening function.

SECTION 82 - LOADER

Show Quick Links

Chapters

Table of Contents

580sr+590sr 695sr