Case 580SR Service Manual page 473

www.maskinisten.net
Use an extractor to remove bearing (2).
Loosen all fastening screws (1) of the ring gear (14).
S
WARNING
This operation makes both differential half boxes
free, so take care not to lower the inner compo-
nents.
Remove the ring gear (14) by means of a hammer.
Check the marking points (3) and (12) that will be
useful during the assemblage.
SECTION 25 - FRONT AXLES
12
3
Copyright ©
121
2
F27307
14
1
F27446
14
F27450
F27451