Case 580SR Service Manual page 531

www.maskinisten.net
co
Unscrew and remove both fastening screws (3) of
the planetary carrier cover (1).
Remove the planetary carrier cover (1) from the
wheel hub.
Position the planetary carrier cover (1) on a work-
bench and check its wear conditions.
To replace the gears, if necessary, remove the
screw (11) and the relevant washers (8) and (9).
NOTE: treat the pin (10) with care.
Remove the gear (7) from its seat, taking care not to
lose the rollers inside it.
Remove the shim (5).
SECTION 27 - REAR AXLE
3
1
1
10
Copyright ©
39
F28044
F27405
11
9
8
F28021
7
5
F28022