Related Manuals for Case CX145D SR
Summary of Contents for Case CX145D SR
- Page 1 CX145D SR Crawler Excavator SERVICE MANUAL Part number 51458821 English March 2018...
- Page 2 SERVICE MANUAL CX145D SR Crawler excavators LC version (TIER 4 FINAL) - NA Market CX145D SR Crawler excavators STD W/Blade version (TIER 4 FINAL) - NA Markett 51458821 15/03/2018...
- Page 3 Contents INTRODUCTION Engine..................10 [10.001] Engine and crankcase ............. 10.1 [10.102] Pan and covers .
- Page 4 [35.355] Hydraulic hand control ............. 35.7 [35.356] Hydraulic foot control.
- Page 5 Thanks very much for your reading, Want to get more information, Please click here, Then get the complete manual NOTE: If there is no response to click on the link above, please download the PDF document first, and then click on it. Have any questions please write to me: admin@servicemanualperfect.com...
- Page 6 [55.202] Cold start aid ............... 55.8 [55.011] Fuel tank system .
- Page 7 [86.110] Dozer blade ............... . 86.1 Platform, cab, bodywork, and decals ..........
- Page 8 51458821 15/03/2018...
- Page 9 INTRODUCTION 51458821 15/03/2018...
-
Page 10: Table Of Contents
Contents INTRODUCTION Foreword - Important notice regarding equipment servicing ........3 Safety rules . -
Page 11: Foreword - Important Notice Regarding Equipment Servicing
In any case, no warranty is given or attributed on the product manufactured or marketed by the manufacturer in case of damages caused by parts and/or components not approved by the manufacturer. -
Page 12: Safety Rules
INTRODUCTION Safety rules Personal safety This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible death or injury. Throughout this manual you will find the signal words DANGER, WARNING, and CAUTION followed by special in- structions. -
Page 13: Safety Rules - General Information
Service parts Install CASE CONSTRUCTION genuine service parts. When placing an order, check the parts catalog. It contains the CASE CONSTRUCTION genuine part numbers. Any breakdowns arising from the installation of non-genuine parts are not covered by the warranty. Lubricants (fuel, hydraulic oil) Use the oil from the specified company or specified in the operator's manual or service Manual. -
Page 14: Safety Rules - Personal Safety
Check the operating methods in a safe location before starting the actual work. Understand the machine operations well, then operate in compliance with all service-related laws and regulations. The operator's manual can be purchased at your CASE CONSTRUCTION dealer. WARNING: Working with sloppy clothes or clothes with which safety cannot be ensured leads to damage to the machine and injury to the operator. - Page 15 INTRODUCTION WARNING: Check that there is no one in the surroundings before draining the pressure from hydraulic circuits during machine hydraulic cylinder inspection. WARNING: Use gloves when handling high-temperature parts. WARNING: Bring the lower parts or attachments in contact with the ground before inspecting or repairing them. WARNING: Check that hoses and tubes are securely connected.
-
Page 16: Safety Rules - Rops Judgment
INTRODUCTION Safety rules - ROPS judgment Purpose Check against ROPS determination criteria and decide whether the machine corresponds to ROPS compatible machine or non-ROPS machine. The range of ROPS applicable machines is greatly affected by its own weight and boom. ROPS test complies with its own weight (currently in 2014) when selectable option is installed at maximum. - Page 17 INTRODUCTION Boom position WARNING Avoid injury! Follow ALL of the precautions listed below. Failure to comply could result in death or serious injury. W1091A • When performing modification, in which boom position is lowered, ROPS is not applicable. • When it is assumed that the boom position will be lowered by modification, it is required to consult with company every time.
- Page 18 INTRODUCTION Prohibited Items • Modification that reduces the strength of the platform on which the ROPS structure cab is mounted. Activity and modification that reduces the function of the caulking anchor at left back of the cab. • Modification that affects the ROPS strength of the ROPS structure cab. All changes (grinding, welding, drilling, removal, etc.) Modification prohibited (Red components) are prohibited.
-
Page 19: Safety Rules - Ecology And The Environment
Improper disposal of batteries can contaminate the soil, groundwater, and waterways. CASE CONSTRUCTION strongly recommends that you return all used batteries to a CASE CONSTRUCTION dealer, who will dispose of the used batteries or recycle the used batteries properly. -
Page 20: Torque - Bolt And Nut
INTRODUCTION Torque - Bolt and nut • Tighten alternating between left and right and top and bottom so that uniform tightening force is applied. LPIL12CX00005EA • If L ® was used on a removed bolt (there is something white sticking to the bolt when it is removed), clean the OCTITE old L ®... -
Page 21: Torque - Special Torque Setting
INTRODUCTION Torque - Special torque setting Bolt nominal Retightening location Tightening torque Code Wrench diameter 267 – 312 N·m (196.93 – 230.12 lb ft) Travel motor 24 mm Drive sprocket 267 – 312 N·m (196.93 – 230.12 lb ft) 24 mm Take-up roller 24 mm 267 –... - Page 22 INTRODUCTION SMIL17CEX3659HA 51458821 15/03/2018...