Case 580SR Service Manual page 1055

www.maskinisten.net
4. REMOVAL AND INSTALLATION
4.1 CENTER PIVOT BACKHOE ATTACHMENT DISASSEMBLY
Park the machine on a flat surface and position the
backhoe on the ground.
S
WARNING
Always support the structural members so that they
will be stable and safe to work around.
Lower stabilizers sufficiently and however ensure
that the rear tyres are in contact with the ground to
remove the weight from the rear wheels.
IMPORTANT: the rear wheels must remain in con-
tact with the ground.
SECTION 84 - BACKHOE
Copyright ©
17