Case 580SR Service Manual page 725

www.maskinisten.net
2.5 MOUNTING SCREW TORQUE
In the following table are the torques for the various assemblies that should be removed to affect repair.
IMPORTANT: always ensure prior to carrying out repairs on the machine that the vehicle parking brake is on
and the wheels are chocked.
ENGINE/TRANSMISSION
ù
Engine/Transmission retaining bolts and nuts
Engine/Transmission bolts
Retaining bolts air filter-frame
Coolant radiator bolts to frame
Radiator retaining bolts to frame
Front cardan joint to axle
Front cardan joint to transmission
Rear cardan joint to axle
Rear cardan joint to transmission (Powershift)
Rear cardan joint to transmission (Powershuttle)
FRONT AND REAR AXLE
Front axle retaining bolts to frame (2WS)
Front axle retaining bolts to frame (4WS)
Rear axle to frame retaining bolts (2WS)
Rear axle to frame retaining bolts (4WS)
HYDRAULIC SYSTEM
Power steering hoses to support frame
Backhoe control valve to frame bolts
Loader control pipes clamp to frame
TANKS
Oil tank bolts
Fuel tank bolts
SECTION 39 - CHASSIS
COMPONENTS
COMPONENTS
COMPONENTS
COMPONENTS
Copyright ©
11
TORQUES
95 Nm
95 Nm
25 Nm
95 Nm
95 Nm
38 Nm
38 Nm
38 Nm
38 Nm
70 Nm
TORQUES
500 Nm
500 Nm
800 Nm
900 Nm
TORQUES
55 Nm
90 Nm
25 Nm
TORQUES
85 Nm
85 Nm