Case 580SR Service Manual page 1060

www.maskinisten.net
Copyright ©
22 SECTION 84 - BACKHOE
Remove the snap ring (4), slide out the pin (5) and
with an hammer remove the pin (6) of the swing cyl-
inder.
Repeat the operation with both swing cylinders. Re-
move the snap ring (7).
Slide out the pin (8) and with an hammer remove the
lower pin (9) from the swing support.
Unscrew the screw (10).
Remove the upper pin (11) of the swing support.
Now it is possible to remove the backhoe assembly.