Case 580SR Service Manual page 300

www.maskinisten.net
Copyright ©
234 SECTION 21 - TRANSMISSION
Install the spring retainer.
Install the spring retainer snap ring. Use a sleeve
with the proper inner diameter to fit over shaft and
against snap ring. A sharp blow of a soft hammer will
compress the spring and the seat retainer ring. Be
sure ring is in full position in the groove.
Install one outer half disc, with friction material away
from the piston.
Install one steel disc.
Alternate friction and steel discs until the proper
amount of discs are installed.
First and last discs are steel.