Case 580SR Service Manual page 551

www.maskinisten.net
Loosen all screws (1) of the ring gear (10).
S
WARNING
This operation makes both differential half boxes
free, so take care not to lower the inner compo-
nents.
Remove the ring gear (10) by means of a hammer.
Check the marking points (8) and (9) that will be
useful during the assemblage.
Remove the gear (16) and the shim (17).
SECTION 27 - REAR AXLE
9
8
Copyright ©
59
10
1
F28056
10
F28057
F28058
17
16
F28059