Case 580SR Service Manual page 359

www.maskinisten.net
Remove the O-ring (11) from the rear support (10).
NOTE: this is a destructive operation for the O-ring.
Remove the bolt (8) with the lube nibble (9).
Remove the bush (12) from the rear support (10).
Remove the bushes (1) from the rear support (10).
Remove the bush (13) and the thrust washer (14)
from differential support only if necessary.
NOTE: it is advisable to heat the bush (13) to make
easy this operation; this is a destructive operation
for the bush.
SECTION 25 - FRONT AXLES
13
10
9
10
14
Copyright ©
7
11
10
F27353
12
8
F27354
1
F27355
F27356