Case 580SR Service Manual page 420

www.maskinisten.net
68
Remove the ring nut (10) and collect its washer (9).
Tap with a soft hammer to extract the pinion (1).
S
WARNING
Take care not to lower the pinion (1).
Collect the washers (4) and (6), the spacer (5) and
the bearing (8).
Place the differential carrier (7) on a flat surface and
remove the bearing cups (3) and (8) using a drift and
a hammer.
To remove the bearing (3) of the pinion (1), use an
extractor.
Collect the bearing (3) and the shim (2).
SECTION 25 - FRONT AXLES
9
10
5
1
6
4
7
Copyright ©
F27321
8
F27322
3
8
F27326
3
2
1
F27324