www.maskinisten.net
52
5. Move the condenser (10) forward.
Clean the condenser (10) by compressor air.
CAB AIR FILTER
1. Before servicing the filter (1), switch off the blow-
er and close all windows and one door. Slam the
final door closed and the resulting back pressure
will dislodge most of the loose dirt from the un-
derside of the filter.
2. Remove the filter and clean it by blowing with
compressed air not exceeding 2 bar.
IMPORTANT: make sure you protect your face be-
fore using compressed air.
Blow the dust from the upper surface through the
element to the underside. Hold the nozzle at
least 300 mm from the element to prevent dam-
age to the paper pleats.
3. Clean both filter chambers with a damp, lint free
cloth.
4. Replace the filter element with the rubber seal
uppermost and re-install the covers.
SECTION 50 - CAB HEATING AND AIR CONDITIONING
Copyright ©