Case 580SR Service Manual page 444

www.maskinisten.net
92
Remove the tie rods (3) and (10) by loosening the
nuts (4) and (9) with a suitable wrench, then check
their conditions.
Unscrew the fastening screws (13) and take the
steering cylinder (7).
Remove only parts that need to be overhauled and/
or replaced.
Remove the cylinder head (18) from the cylinder
body (22) and remove it from the rod (20).
Remove the rod (20) from the cylinder body (22).
Remove all the seals and O-rings (16, 17, 19, 21, 23
and 24) from the cylinder body (22), the cylinder
head (18), and the rod (20).
Assembly
Assemble new seals and O-rings (16, 17, 19, 21, 23
and 24) on the cylinder head (18), on the rod (20)
and on the cylinder body (22).
Assemble the cylinder head (18) on the rod (20).
Slide the pre-assembled rod (20) into the cylinder
body (22).
SECTION 25 - FRONT AXLES
16
16
13
14
15
7
6
5
4
3
23
20
17
19
18
23
17
20
19
18
20
18
Copyright ©
13
10
9
8
F27397
24
22
21
F27398
24
22
21
F27392
22
F27399