Case 580SR Service Manual page 935

www.maskinisten.net
NOTE: never use the work lights during road travel.
6. SIDE INSTRUMENT CLUSTER
7. HORN BUTTON
(Powershift transmission)
This hold-down switch operates the warning
horn.
8. UP/DOWN SWITCH
By means of this control, it is possible to scroll
through the menu or data options shown on the
diagnostic display.
9. MENU ENTER SWITCH
By means of this control it is possible to display
and confirm the menu options shown on the dis-
play.
10. REAR WINDSHIELD WIPER AND WASHER
SWITCH
When this switch is pressed, the windshield wip-
er is activated and will continue operating until
the switch is returned to the OFF position.
The windshield washer is operated by further
pressing and holding the switch.
When the switch is released, the washer stops
and the wiper starts operating again.
11. BACKHOE ATTACHMENT SIDESHIFT CAR-
RIAGE LOCKING / UNLOCKING SWITCH
(Sideshift version)
The switch is used to lock or unlock the backhoe
attachment sideshift carriage to allow sideshift-
ing.
SECTION 55 - ELECTRICAL SYSTEM
Copyright ©
107