Case 580SR Service Manual page 664

www.maskinisten.net
74
DISASSEMBLY CYLINDER
1. Bushing
2. Cylinder rod
3. Wiper ring
4. Ring seal
5. Ring seal
6. Cylinder head
7. Snap ring
8. Back-up ring
The disassembly procedure that follows takes into
consideration the hydraulic piping already disas-
sembled.
S WARNING
Cylinder weight: 32.5 kg
Lift and securely place the cylinder on a workbench.
Be sure that the cylinder is placed horizontally. Drain
hydraulic oil from the cylinder.
SECTION 35 - HYDRAULIC SYSTEM
9. O-ring
10. Piston
11. Piston gasket
12. Piston guide
13. Screw
14. Cylinder tube
15. Bushing
Copyright ©