5.10 Swing Cylinder - Case 580SR Service Manual

Hide thumbs Also See for 580SR:

Table of Contents

www.maskinisten.net

SECTION 35 - HYDRAULIC SYSTEM

5.10 SWING CYLINDER

(2) Completely retracted

CYLINDER REMOVAL

Park the machine on a flat surface and position the

backhoe on the ground. Support the backhoe ele-

ments for cylinder removal using a suitable stand.

Always support the structural members so that they

will be stable and safe to work around.

Stop the engine and move the backhoe attachment

control levers through all operating positions to re-

lieve any residual pressures in the system.

Loosen and remove the nuts (1). Slide out the screw

(2) from the opposite side. Now the pin (3) can come

out and release the rod cylinder. If necessary ham-

mer to help the pin (3) to come out.

Show Quick Links

Table of Contents

580sr+590sr 695sr