Case 580SR Service Manual page 542

www.maskinisten.net
50
Remove the seal rings (2) from the axle beam (4).
NOTE: destructive operation for the seal rings (3).
Remove the bushing (3) from the axle shaft (4) only
if the wear conditions require it.
S
WARNING
Be careful not to damage the bush seat.
Assembly
Assemble the bush (3) on the axle beam with the
special tool 380002226 and a hammer.
Assemble the seal ring (2) on the axle beam with the
special tool 380002670 and a hammer.
Assemble the seal ring (2).
Insert the cardan shaft (1) into the axle shaft (4).
S WARNING
Be careful not to damage the seal ring.
SECTION 27 - REAR AXLE
Copyright ©
3
2
2 3
2
4
1
2
F27281
F28029
F28048
F28049