Case 580SR Service Manual page 385

www.maskinisten.net
Remove the cover (11) from differential support with
a lever.
Remove the O-ring (12) and the seal ring (13) from
the cover (11).
NOTE: destructive operation for the seal rings.
Remove the bush (9) and the thrust washer (10)
from differential support only if necessary.
NOTE: it is advisable to heat the bush (9) to make
easy this operation; this is a destructive operation
for the bush.
Loosen the bolt (19).
Take the front support (20) out from the axle hous-
ing (15).
SECTION 25 - FRONT AXLES
11
13
12
11
10
9
20
15
Copyright ©
33
F27218
F27219
F27220
19
F27221