Case 580SR Service Manual page 439

www.maskinisten.net
Remove the O-ring (22).
Remove the bolt (19) and the lube nibble (23).
Remove the bush (18) from the front support (20).
Remove the bushes (21) from front support (20).
Remove the bush (17) and the washer (16) from the
axle housing (15) only if necessary.
NOTE: it is advisable to heat the bush (17) to make
easy this operation; this is a destructive operation
for the bush.
Assembly
Insert the washer (10) into the differential support.
Apply sealant on the bushes (6) contact surface.
Assemble the bushes (6) to the rear support (5) with
a pad and a hammer.
SECTION 25 - FRONT AXLES
22
21
20
18
17
15
10
6
5
Copyright ©
87
19
23
F27389
16
F27390
F27387
F27217