Backhoe Attachment Dipper Cylinder - Case 580SR Service Manual

www.maskinisten.net
Copyright ©
SECTION 35 - HYDRAULIC SYSTEM 83
5.5

BACKHOE ATTACHMENT DIPPER CYLINDER

(1) Stroke
(2) Completely retracted
CYLINDER REMOVAL
Park the machine on a flat surface and position the
backhoe on the ground. Support the backhoe ele-
ments for cylinder removal using a suitable stand.
S
WARNING
Always support the structural members so that they
will be stable and safe to work around.
Stop the engine and move the backhoe attachment
control levers through all operating positions to re-
lieve any residual pressures in the system.
Position a sling or other suitable lifting equipment
around the cylinder.