Case 580SR Service Manual page 467

www.maskinisten.net
Use an extractor to remove bearing (2).
Loosen all fastening screws (1) of the ring gear (11).
S
WARNING
This operation makes both differential half boxes
free, so take care not to lower the inner compo-
nents.
Remove the ring gear (11) by means of a hammer.
Check the marking points (3) and (9) that will be
useful during the assemblage.
SECTION 25 - FRONT AXLES
9
3
Copyright ©
115
2
F27307
11
1
F27308
11
F27309
F27439