Case 580SR Service Manual page 441

www.maskinisten.net
Apply sealant on the bushes (21) contact surface.
Assemble the bushes (21) to the front support (20)
with a pad and a hammer.
Assemble the bush (18) into the front support (20)
with a suitable driver and a hammer.
S
WARNING
Align the bush hole with the bolt (19) hole.
Mount the bolt (19).
Assemble O-ring (22).
Insert the front support (20) on the axle housing.
Tighten the bolt (19) to the specified torque.
Assemble the lube nibble (23).
Assemble the flange (12) and fasten by tightening
the screws (11).
SECTION 25 - FRONT AXLES
21
20
20
18
22
20
12
11
Copyright ©
89
F27224
19
F27393
19
23
F27394
F27383