Case 580SR Service Manual page 687

www.maskinisten.net
DISASSEMBLY STABILIZER CYLINDER - CENTER PIVOT
1. Cylinder rod
2. Wiper ring
3. Ring seal
4. Ring seal
5. Guide bush
6. Safety screw
7. Cylinder head
The disassembly procedure that follows takes into
consideration the hydraulic piping already disas-
sembled.
S WARNING
Cylinder weight: 43.5 kg
Lift and securely place the cylinder on a workbench.
Be sure that the cylinder is placed horizontally. Drain
hydraulic oil from the cylinder.
SECTION 35 - HYDRAULIC SYSTEM
8. Back-up ring
9. O-ring
10. Piston gasket
11. Piston guide
12. Piston
13. Screw
14. Cylinder tube
Copyright ©
97