Case 580SR Service Manual page 679

www.maskinisten.net
DISASSEMBLY CYLINDER
1. Wiper ring
2. Bushing
3. Cylinder rod
4. Wiper ring
5. Ring seal
6. Ring seal
7. Guide bush
8. Safety screw
9. Cylinder head
The disassembly procedure that follows takes into
consideration the hydraulic piping already disas-
sembled.
S
WARNING
Cylinder weight: 96 kg
Lift and securely place the cylinder on a workbench.
Be sure that the cylinder is placed horizontally. Drain
hydraulic oil from the cylinder.
SECTION 35 - HYDRAULIC SYSTEM
10. Back-up ring
11. O-ring
12. Piston gasket
13. Piston guide
14. Piston
15. Screw
16. Cylinder tube
17. Bushing
18. Wiper ring
Copyright ©
89