Camshaft Sprocket Inspection - Polaris RZR XP 1000 2014 Service Manual

Table of Contents

ENGINE / COOLING SYSTEM

CAMSHAFT SPROCKET INSPECTION

Inspect cam sprocket teeth

Replace timing chain and sprockets if worn or damaged.

for wear or damage.

CAMSHAFT / CAMSHAFT BORE

INSPECTION (1000)

Inspect all main journals and cam lobes as described

below and compare to specifications. Replace camshaft

(s) or cylinder head if worn beyond service limit or if any

surface is pitted or damaged.

1. Visually inspect each cam lobe for wear or damage.

2. Measure the height of each cam lobe from the base

circle to highest point on the lobe using a

micrometer. Compare to specification.

Replace camshafts if damaged or if any part is worn

past the service limit.

Camshaft Lobe Height:

1.5390 - 1.5429" (39.09 - 39.19 mm)

Service Limit:

1.5370" (39.04 mm)

1.5142 - 1.5181" (38.46 - 38.56 mm)

Service Limit:

1.5122" (38.41 mm)

3. Visually inspect each camshaft journal for scoring,

wear or damage.

9926816 R07 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual

Table of Contents