Heater Failed - Agilent Technologies 1100 Series Reference Manual
Diode array and multiple wavelength detectors
Hide thumbs
Also See for 1100 Series:
- Reference manual (346 pages) ,
- Service manual (288 pages) ,
- User manual (214 pages)
Table of Contents
Advertisement
3
Troubleshooting and Test Functions
Heater Failed
Every time the deuterium lamp or the tungsten lamp is switched on or off a
heater self-test is performed. If the test fails an error event is created. As a
result the temperature control is switched off.
• Defective connector or cable.
• Defective heater.
82
Probable Causes
Suggested Actions
Ensure the connector to the detector main board is seated firmly.
Exchange heater assembly.
1100 Series DAD and MWD Reference Manual
Advertisement
Table of Contents
