Agilent Technologies 1100 Series Reference Manual page 280

7 Control Module Screens for Agilent 1100 DAD and MWD
Signal plot
Press F6 key (Plot) to enter the plot screen (available also from the Analysis
and System screen). Here you can observe the online signal(s). To add
additional online signals (maximum 3), press F6 key (Select). If more than one
signal is configured (see next), use the 1-2-3 number key to switch between the
signals.
Press F6 key (Select). Here you can add additional online signals (maximum
are 3), press F6 key (Select). Additional signals could be also pressure or
temperature signals from other modules. Use the Right/Left arrows to switch
between Available and Selected Signals. Use the F8 key (Move) to enter
available signals into the box for selected signals or vice versa.
280 1100 Series DAD and MWD Reference Manual