Agilent Technologies 1100 Series Reference Manual page 97

Electronic boards and components are sensitive to electronic discharge (ESD). In order
C A U T I O N
to prevent damage always use an ESD protection (for example, the ESD wrist strap
from the accessory kit) when handling electronic boards and components (see
the ESD Strap"
Eye damage may result from directly viewing the light produced by the deuterium
WA R N I N G
lamp used in this product. Always turn the deuterium lamp off before removing it.
Cleaning the Detector
The detector case should be kept clean. Cleaning should be done with a soft
cloth slightly dampened with water or a solution of water and mild detergent.
Do not use an excessively damp cloth allowing liquid to drip into the detector.
Do not let liquid drip into the detector. It could cause shock hazard and it could
WA R N I N G
damage the detector.
1100 Series DAD and MWD Reference Manual
on page 98).
Repairing the Detector
"Using
4
97