Agilent Technologies 1100 Series Reference Manual page 169

16 Replace the leak pan into the cabinet bottom.
1100 Series DAD and MWD Reference Manual
Next steps:
• Reconnect the leak sensor cable to the processor board
(J21).
• Replace the optical unit, see
(G1315A/G1365A)" on page 171 or
Optical Unit (G1315B/G1365B)"
• Replace the front cover, top cover and top foam section,
see "Replacing the Foam and the Top Cover"
page 175.
• Replace the detector into the stack.
• Reconnect the cables.
• Turn on the detector.
Repairing the Detector
"Installing the Optical Unit
"Installing the
on page 173.
on
4
169