Exchanging The Fan (G1315A/G1365A) - Agilent Technologies 1100 Series Reference Manual

4 Repairing the Detector

Exchanging the Fan (G1315A/G1365A)

Use this procedure for the the G1315A/G1365A only. For G1315B/G1365B detectors refer
N O T E
to
When required
Tools required
Parts required
Preparations for this procedure:
• Turn off the lamp.
• Switch off the detector, and disconnect the cables and
acpillaries.
• Remove detector from stack and place it on the working
bench.
• Remove front cover, top cover and top foam section, see
"Removing the Top Cover and Foam"
148
"Replacing Fan Parts (G1315B/G1365B)"
If the fan is defective or noisy
Screwdriver POZI 1 PT3
Fan assembly 3160-1016
on page 140.
on page 150.
1 Disconnect the connectors from the main board (fan J16)
and pull the fan assembly out of its location.
1100 Series DAD and MWD Reference Manual