Agilent Technologies 1100 Series Reference Manual page 274

7 Control Module Screens for Agilent 1100 DAD and MWD
Here, e.g. the column compartment parameters are shown on the display as
well. The number of parameters on the display are restricted as additional
modules are added. Maximum 4 modules are shown automatically. If more
modules are in the system, you have to chose in Setup view.
With the Settings key you open a pull-down menu where you can select the
DAD modules.
Settings
Within the Settings you can change the DAD or MWD parameters and with a
different set of parameters available through the F1-5 keys. F7 key resets the
DAD or MWD to default values. F8 opens a window to turn on the lamps.
274 1100 Series DAD and MWD Reference Manual