Agilent Technologies 1100 Series Reference Manual page 285

Control Module Screens for Agilent 1100 DAD and MWD 7
Info Log
Use the m-key to receive a pop-up menu, Select Info Log. A list of the last
events are listed. For troubleshooting reasons they can be printed or saved to
a file on the PCMCIA card.
EMF (Early Maintenance Feedback)
Use the F1 key (EMF) to set EMF parameters. Choose menu item 1 (Setup
limits) to select lamp-on level for the UV and Vis lamp at which you want to
receive a warning.
If a set limit has been exceeded, a message box will pop up. This will not stop a
sequence or run (information only to plan maintenance activities). If you press
Reset, the limits will be removed. Ignore will continue to keep the EMF flag
set.
1100 Series DAD and MWD Reference Manual 285