Using The Esd Strap - Agilent Technologies 1100 Series Reference Manual

4 Repairing the Detector

Using the ESD Strap

Electronic boards are sensitive to electronic discharge (ESD). In order to
prevent damage, always use an ESD strap supplied in the standard accessory
kit (see
components.
1 Unwrap the first two folds of the band and wrap the exposed adhesive side
2 Unroll the rest of the band and peel the liner from the copper foil at the
3 Attach the copper foil to a convenient and exposed electrical ground.
Figure 28
98
"Accessory Kit"
firmly around your wrist.
opposite end.
Using the ESD Strap
on page 208) when handling electronic boards and
1100 Series DAD and MWD Reference Manual