Replacing The Interface Board - Agilent Technologies 1100 Series Reference Manual

Replacing the Interface Board

When required
Part required
Tools required
1 Install the ESD strap. Move the power lock across the
power inlet.
3 If required, insert the interface board and fix the screws.
1100 Series DAD and MWD Reference Manual
For all repairs inside the detector or for installation of the board
Interface board (BCD) G1351-68701 with external contacts and BCD outputs,
see "BCD Board"
Interface board (LAN) see
page 255.
None
ESD strap
power lock
on page 253
"LAN Communication Interface Board"
2 If required, unscrew and remove the interface board. Place
the board on the ESD kit.
Next steps:
• Remove the ESD strap.
• Reinstall the module into the stack.
Repairing the Detector
on
4
179