Leak Sensor Open - Agilent Technologies 1100 Series Reference Manual
Diode array and multiple wavelength detectors
Hide thumbs
Also See for 1100 Series:
- Reference manual (346 pages) ,
- Service manual (288 pages) ,
- User manual (214 pages)
Table of Contents
Advertisement
3
Troubleshooting and Test Functions
Leak Sensor Open
The leak sensor in the detector has failed (open circuit).
The current through the leak sensor is dependent on temperature. A leak is
detected when solvent cools the leak sensor, causing the leak sensor current to
change within defined limits. If the current falls outside the lower limit, the
error message is generated.
• Leak sensor not connected to the detector main board.
• Defective leak sensor.
60
Probable Causes
Suggested Actions
Ensure the leak sensor is connected correctly.
Exchange the leak sensor.
1100 Series DAD and MWD Reference Manual
Advertisement
Table of Contents
