Agilent Technologies 1100 Series Reference Manual page 28

1 Installing the Detector
9 Remove the flow cell and establish a flow and observe for
leaks.
The installation of the detector is now complete.
The detector should be operated with the front cover in place to protect the flow cell area
N O T E
against strong drafts from the ouside and to cover the deuterium lamp.
Some types of the Agilent deuterium lamps show a light ring during operation. This is not
harmful, refer to
28
10 Insert the flow cell, close the cover and replace the front
cover.
"UV-Radiation" on page 307.
1100 Series DAD and MWD Reference Manual