6
Introduction to the Detector
Introduction to the Detector
The detector is designed for highest optical performance, GLP compliance and
easy maintenance. It includes the following features:
• long-life deuterium and tungsten lamps for highest intensity and lowest
• no loss in sensitivity for up to five wavelengths simultaneous,
• programmable slit from 1–16 nm for complete optimization of sensitivity,
• optional flow-cell cartridges (standard 10 mm 13 µl, semi-micro 6 mm 5 µl,
• easy front access to lamps and flow cell for fast replacement, and
• built-in holmium oxide filter for fast wavelength accuracy verification,
• built-in temperature control for improved baseline stability (G1315B DAD
For specifications, see
228
detection limit over a wavelength range of 190–950 nm,
linearity and spectral resolution,
80 nl, 500 nl, 10 mm, high pressure 10 mm 1.7 µl and prep-cells) are
available and can be used depending on the application needs,
and G1365B MWD).
"Performance Specifications"
1100 Series DAD and MWD Reference Manual
on page 296.