Copier (Service Mode For Copier); Display (State Display Mode) - Canon imageRUNNER ADVANCE C3330 Series Service Manual

COPIER (Service mode for copier)

DISPLAY (State display mode)

■ VERSION
COPIER (Service mode for copier) > DISPLAY (State display mode) > VERSION
DC-CON 1
Detail
Use Case
Display/Adj/Set Range
R-CON 1
Detail
Use Case
Display/Adj/Set Range
PANEL 1
Detail
Use Case
Display/Adj/Set Range
ECO 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
SORTER 1
Detail
Use Case
Display/Adj/Set Range
NIB 1
Detail
Use Case
Display/Adj/Set Range
SDL-STCH 1
Detail
Use Case
Display/Adj/Set Range
MN-CONT 1
Detail
Use Case
Display/Adj/Set Range
LANG-EN 1
Detail
Use Case
Display/Adj/Set Range
Display of DCON firmware version
To display the firmware version of DC Controller PCB.
When upgrading the firmware
00.01 to 99.99
Display of RCON firmware version
To display the RCON firmware version in the Main Controller firmware.
When upgrading the firmware
00.01 to 99.99
Dspl of Control Panel CPU PCB ROM ver
To display the ROM version of Control Panel CPU PCB.
When upgrading the firmware
00.01 to 99.99
Display of ECO-ID PCB firmware version
To display the firmware version of the ECO-ID PCB.
When upgrading the firmware
N/A (Display only)
00.01 to 99.99
Display of FIN-CONT firmware version
To display the firmware version of Finisher Controller PCB.
When upgrading the firmware
00.01 to 99.99
Display of network software version
To display the version of the network software.
When upgrading the firmware
00.01 to 99.99
Dspl of Saddle Sttch Ctrollr PCB ROM ver
To display the ROM version of the Saddle Stitcher Controller PCB.
When upgrading the firmware
00.01 to 99.99
Display of MNCON firmware version
To display the firmware version of Main Controller PCB.
When upgrading the firmware
00.01 to 99.99
Display of English language file version
To display the version of English language file.
When upgrading the firmware
00.01 to 99.99
656
8. Service Mode