Canon imageRUNNER ADVANCE C3330 Series Service Manual page 910

COPIER (Service mode for copier) > OPTION (Specification setting mode) > IMG-FIX
FXS-TM17 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Unit
Default Value
Amount of Change per
Unit
FXS-TM18 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Unit
Default Value
Related Service Mode
Amount of Change per
Unit
Set ITOP control temp: extra-long pln
To set the offset of ITOP control temperature for extra-long plain paper 1/2/3, recycled paper 1/2/3,
thin paper, colored paper, tracing paper, pre-punched paper and bond paper (width: 300 to 320
mm).
As the value is changed by 1, the control temperature is changed by 5 deg C.
Decrease the value when uneven gloss occurs, and increase the value when a fixing failure occurs
on the leading edge of paper.
When uneven gloss/a fixing failure occurs on the leading edge (74 mm) of extra-long plain paper
1/2/3, recycled paper 1/2/3, thin paper, colored paper, tracing paper, pre-punched paper and bond
paper
Enter the setting value (switch negative/positive by -/+ key) and press OK key.
If the value is too large, uneven gloss may occur.
If the value is too small, a fixing failure may occur on the leading edge of paper. (Toner does not
peel off.)
-2 to 2
-2: -10 deg C, -1: -5 deg C, 0: 0 deg C, 1: +5 deg C, 2: +10 deg C
deg C
0
5
Set ITOP control temp: extra-long hvy 1
To set the offset of ITOP control temperature for extra-long heavy paper 1/2/3/4, coated paper
1/2/3 and label (width: 300 to 305 mm).
As the value is changed by 1, the control temperature is changed by 5 deg C.
Decrease the value when uneven gloss occurs, and increase the value when a fixing failure occurs
on the leading edge of paper.
When uneven gloss/a fixing failure occurs on the leading edge (74 mm) of extra-long heavy paper
1/2/3/4, coated paper 1/2/3 and label
Enter the setting value (switch negative/positive by -/+ key) and press OK key.
If the value is too large, uneven gloss may occur.
If the value is too small, a fixing failure may occur on the leading edge of paper. (Toner does not
peel off.)
-2 to 2
-2: -10 deg C, -1: -5 deg C, 0: 0 deg C, 1: +5 deg C, 2: +10 deg C
deg C
0
COPIER> OPTION> IMG-FIX> FXS-TM19
5
898
8. Service Mode