Canon imageRUNNER ADVANCE C3330 Series Service Manual page 957

COPIER (Service mode for copier) > OPTION (Specification setting mode) > LCNS-TR
ST-XPS 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
TR-XPS 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
ST-2600 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
TR-2600 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
ST-OPFNT 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Additional Functions
Mode
Supplement/Memo
Install state dspl:direct print XPS func
To display installation state of direct print XPS function when disabling the function with license
transfer.
When checking whether direct print XPS function is installed
1) Select ST-XPS.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is displayed under TR-XPS.
When operation finished normally: OK!
According to the setting at shipment
Trns lcns key dspl of direct print XPS
To display transfer license key to use direct print XPS when the function is disabled with license
transfer.
- When replacing the HDD
- When replacing the device
1) Select ST-XPS.
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-XPS.
24 digits
Inst state dspl: IEEE2600.1 scrty func
To display installation state of security function of IEEE2600.1 when disabling the function with
license transfer.
When checking whether security function of IEEE2600.1 is installed
1) Select ST-2600.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is displayed under TR-2600.
When operation finished normally: OK!
According to the setting at shipment
Trn lcns key dspl: IEEE2600.1 scrty func
To display transfer license key to use security function of IEEE2600.1 when the function is disabled
with license transfer.
- When replacing the HDD
- When replacing the device
1) Select ST-2600.
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-2600.
24 digits
Install state display of PCL Font Set
To display installation state of PCL Font Set when disabling the function with license transfer.
When checking whether PCL Font Set is installed
1) Select ST-OPFNT.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is displayed under TR-OPFNT.
When operation finished normally: OK!
0
Function Settings> Printer> Output Report> PCL> Font List
PCL Font Set can be installed only at installation by service technician or at pre-installation.
When replacing the HDD, check that AndaleFont is displayed on the font list in Settings/
Registration menu.
945
8. Service Mode