Canon imageRUNNER ADVANCE C3330 Series Service Manual page 928

COPIER (Service mode for copier) > OPTION (Specification setting mode) > USER
FROM-OF 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
DOM-ADD 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Additional Functions
Mode
FILE-OF 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
MAIL-OF 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Hold/deletion of e-mail sender's address
To set whether to delete the sender's address (From) at the time of e-mail transmission.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Retained, 1: Deleted
0
ON/OFF of e-mail destn domain auto add
To set whether to automatically add the specified domain to the sending address (To) entered at
the time of e-mail transmission.
If specifying "xxx.com" in "Domain Name" in Settings/Registration menu in advance, just entering
"aaa" enables to display "aaa@xxx.com" when sending e-mail.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: OFF, 1: ON
0
Preferences> Network> TCP/IP Settings> DNS Settings> DNS Host/Domain Name Settings>
Domain Name
Set file transmission to entered address
To set whether to allow file transmission to a newly entered address.
When 1 is set, file transmission is not available by entering the address because "File" is not
displayed on the transmission screen.
The addresses already registered in the Address Book can be used.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
To restrict addresses for transmission, be sure to manually delete them because the addresses
registered in the Address Book can be used.
0 to 1
0: Allowed, 1: Prohibited
0
Setting of e-mail TX to entered address
To set whether to allow e-mail transmission to a newly entered address.
When 1 is set, e-mail transmission is not available by entering the address because "E-mail" is not
displayed on the transmission screen.
The addresses already registered in the Address Book can be used.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
To restrict addresses for transmission, be sure to manually delete them because the addresses
registered in the Address Book can be used.
0 to 1
0: Allowed, 1: Prohibited
0
916
8. Service Mode